Kyosho 20572BK 1/18 Drone Racer Zephyr Force Black Readyset

Product Code: KYO-20572BK
Barcode: 4548565313181
$329.99
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

DRONE RACER glides above the ground with pistol-grip transmitter control.

Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Intermediate and Beginner mode speed settings (Easy mode / Active mode) are available so you can experience the fun of drone flying at your own pace.

Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Now you can experience the fun of drone flying at your own pace.

Includes the latest 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced aircraft-like instrument panel. Flying height adjustment switch is installed on the base of the transmitter grip.

Dogfight only 35cm above the ground. Speeds over the ground just like aHoverboard. Newly developed drone technology.

The DRONE RACER is equipped with advanced ultrasonic sensors, 6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors), barometric pressure sensor and four fast response mini coreless motors. Speed switching function provides a choice between “Easy Mode” and “Active Mode” and delivers direct intuitive flight control.

LOW HEIGHT FLYING CONTROL

Altitude is automatically maintained with ultrasonic and barometric pressure sensors. Altitude setting of 35cm or 60cm can be selected with a switch on the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone can enjoy the fun of flying drones.

Flies over any surface, even over water. Maintains constant altitude of 13inches (23 inches) using ultrasonic sensors.

VARIABLE PROPELLER UNIT STRUCTURE

H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a racing weapon.

KYOSHO DRONE CONTROL MIXING SYSTEM

Optimal roll and yaw mixing match control from the steering wheel.

DRONE BACKWARD CONTROL

Uses similar control movement as a car.

Contents

  • Fuselage
  • 2.4GHz Transmitter KT-231P+
  • USB auto cut charger
  • Pinion gear replacement tool (combination binding stick)
  • 3.7V-1000mAh Li-Po battery
  • Arm holder (10°, 20°)
  • USB cable
  • Spare propeller (for one drone)
  • Quick start guide
  • Instruction manual

Kyosho DRONE RACER is not subject to the revised Japanese aviation law. This product can be enjoyed by anyone.

Kyosho DRONE RACER is not subject to the revised Japanese aviation law. This product can be enjoyed by anyone.

Requires

  • 4 x AA size batteries for transmitter
  • Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within one hour)


  • Length: 302mm (with guard)
  • Width: 300mm (with guard)
  • Height: 65mm
  • Gear Ratio: 5 : 1
  • Weight: 130g approx.
  • Motor: 8.5mm coreless
  • Battery: 3.7V-1000mAh
  • Propeller: D5 x P4
  • Flight Time: 10 min approx.
  • Charging Time: 1-2 hours (depending on USB power output)
  • 30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle setting)/38km/h
  • approx. (when using optional parts)
  • Energy density: 318Wh/L (not subjected PSE)
  • Flight altitude: Low 35cm/High 60cm approx. (setting can be changed using software application)