close
Home RC Electronic Speed Control ESC Dualsky DSXM42285 SUMMIT 130XHV Brushless 5S-14S ESC
Show sidebar

Dualsky DSXM42285 SUMMIT 130XHV Brushless 5S-14S ESC

Product Code: DSXM42285
$369.99
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

This Dualsky SUMMIT 100XHV Brushless ESC is designed for 3D aircraft or fixed-wing UAVs.

Features

  • Designed for 3D airplanes and fixed-wing UAVs
  • New generation 32-bit ARM electric drive system
  • High performance TOLL package MOSFETs for excellent stability
  • Excellent motor drive capability, supporting GA series 28-pole motors
  • All metal CNC housing with built-in fan, also designed with an external fan fixed interface
  • Compact design with built-in capacitors
  • Multiple protection measures are implemented, throttle, voltage, current, temperature, and low RPM
  • 100% load test passed
  • Efficient driving core, abundant torque
  • Effictivley avoid sync-loss conditions
  • Supports efficient SINE wave working mode
  • Regenerative braking supported
  • Rorational direction can be set. Bidirectional operation is also supported
  • Supports a variety of telemetry protocols (SBus2, EXBus, SRXL2)
  • Flight modes can be switched by the Mode button
  • Type-C USB port for firmare updating and programming
  • Supports fixed wing govenor mode (in Beta, with subsequent firmware update)
  • Dimensions (L x W x D): 91.3 x 43.2 x 23.1 mm
  • Weight w/ wire(g): 200g
  • Number of Cell: 5S-14S LiPo, 18.5V - 51.8V
  • Continuous Current(A): 130
  • Bursts Current(A): 170
  • Resistance (Ri)(mOhm): 1.2 mOhm (Ta = 25 degrees celcius)
  • Maximum speeds: Upto 510K RPM
  • Signal & frequency: PWM, upto 450Hz
  • Battery eliminate circuit: N/A
  • Motor Direction: Normal - Reversed - Bidirectional
  • Programming: Built-in Type-C to PC (Software: X-GOV APP & BLHeli32_Rev.Dualsky)
  • FC Telemetry: YES (Automatic protocol identification, protocol: SBus2, EXBus, SRXL2)
  • Energy Recovery: YES (Default = enable)
  • Brake On Stop: YES & Adjustable (Default= OFF)
  • Timing System: Programmable (Default=22°)
  • Low voltage protection: Programmable (Default=3.00V/cell)
  • Acceleration: Programmable (Default flight mode = Freestyle)
  • Overheat protection: YES(Default=140 C)
  • Water & dust proof: IP3X
  • Cooling Fan: YES, built-in a 25mm fan, external fans can be installed
  • Full CNC Alu. Case: YES
  • LED indicator: YES, flight mode and USB mode
  • Input Wires: 10AWG, 300mm, XT90 anti-spark plug
  • Output Wires: 10AWG, 100mm, DB6F
  • Signal Wire: THR: JR, 500mm TEL: JR, 500mm
  • Tested motors: Dualsky EA3 SE, HD3, GA MKII and DA V4series, CRS3000 MKII, CRS4000. Good compatibility with the 3rd party motors
  • Applications: Up to 5.8KW & 8.0KW input power, equal to 40cc to 70cc class gasoline engines. For 3D airplanes and fixed wing UAVs