MJX 1/12 Hyper Go Ford Bronco R 4WD Brushless 2S RC Crawler

Product Code: MJX-H12P
Barcode: 50775174
$329.00
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

Conquer Off-Road Trails 

1/12 Scale Power & Precision!

Bring the legendary Ford Bronco R Baja 1000 to your RC garage with this officially licensed 1/12 scale MJX Hyper Go H12P RC crawler. This rugged 4WD off-road beast blends authentic scale detailing with powerful brushless tech, making it a must-have for hobbyists and collectors alike. 

Simulates FOC Program

The special ESC program simulates FOC automatic cruise, which can maintain the cruise speed and continue when the vehicle encounters an obstacle while moving forward. 3650 3500KV brushless motor with 45A brushless ESC, top speed 15 Km/h, suitable for cross-country cruising

Portal Axles with Frame Rails

Portal axles help raise the center ground clearance to an unparalleled 2.44 inches (62 mm), A thick 1 mm metal ladder frame with cross members provides exceptional torsional rigidity to resist even the worst chassis twisting articulation. Superior capability equals more fun no matter where your adventure takes you

Extreme Approach Angles

With a 58° out-of-box approach angle in the front, H12P is ready to climb. 46° rear approach angle and the 62° passing angle provides extreme capability, even in the deepest ruts

Officially Licensed Replica Body

Plastic hard case body, High-precision simulation of bodywork with tail lights with working turn signals, reverse lights, and more

Great Traction

With a powerful towing capacity of up to 25KG and a wagon cart, the H12P is a great companion for camping

Four-Link Suspension

H12P rides on a sophisticated four-link suspension. Solid metal front and rear axles provide excellent articulation to climb over the toughest obstacles. Metal center driveshafts telescope freely to allow maximum suspension travel

20KG Metal-Gear Waterproof Servo

Digital precision, waterproof construction, and high-strength metal gear outputs provide the H12P with the durability and steering ability to reliably meet tough challenges

4-Channel Radio System

The 2.4GHz transmitters features exclusive cruise control for long-distance treks, and it comes with a drag brake. Set your speed using the transmitter and then use the “TH D/R” knob to fine-tune it faster or slower to match your pace. Lighting buttons can be controlled and winch access buttons are reserved. And support for multiple participants

Features

  • Official Licensed Ford Bronco R Baja 1000 Body – High-detail ABS body for ultimate scale realism
  • High-Efficiency Brushless Power System – Includes a 3650 motor and advanced E45M ESC
  • Heavy-Duty 20kg Metal Gear Servo – Built for responsive and precise off-road steering
  • Reinforced Metal Drivetrain – Includes gate bridge gears, metal rods, and chromium steel construction
  • Oil-Filled Metal Shocks – For smooth suspension travel and rugged terrain handling
  • Splash-Resistant Electronics – Ideal for light water exposure like puddles and wet terrain
  • Durable Chassis Frame – Designed for impact resistance and off-road strength
  • T4M 4CH Radio System – Reliable control for beginner and expert drivers
  • Extended Run Time – Enjoy up to 40 minutes of driving on a single charge

Contents

  • 1× RC Car (with remote controller)
  • 4× Soft Springs
  • 1× USB Charging Cable
  • 1× Hex Wrench
  • 1× Screwdriver
  • 1× User Manual

Requires

  • Includes everything except AA batteries for the transmitter
  • Scale: 1/12
  • Motor: 3650 3500KV Sensorless Brushless Motor
  • ESC: E45M 45A Brushless ESC
  • Drive System: 4-Wheel Drive (4WD)
  • Max Speed (2S): Approx. 12 km/h
  • Battery: 7.4V 2000mAh 15C Li-ion (Included)
  • Run Time: Up to 45 minutes
  • Charging Time: Not specified directly, uses USB cable (approx. 2-3 hours is common for this capacity)
  • Remote Control: 2.4GHz T4M 4-channel
  • Control Distance: Up to 120 meters
  • Dimensions: 44.0 x 20.5 x 18.5 cm

Power Electronics

  • Motor: 3650 3500KV sensorless brushless motor
  • ESC: E45M 45A brushless ESC
  • Servo: 20kg.cm high-torque steering servo
  • Battery: 2S (7.4V) 2000mAh 15C Li-ion battery with T-plug (14.8Wh), 97g

Chassis & Dimensions

  • Product Size: 440 × 205 × 185mm
  • Wheelbase: 232mm
  • Track Width: 165mm
  • Tire Diameter: 90mm
  • Vehicle Weight: 2105g

Packaging Details

  • Box Type: Color box
  • Box Size: 48 × 26 × 24.6 cm
  • Outer Carton Size: 49.5 × 25.5 × 53.5 cm (2 units per carton)
  • Total Package Weight: 3.32kg