Zoukei Mura SWS24 1/32 Horten Ho 229 B

No way!! Really!!!?　

1/32 Horten Ho 229 B (Two-Seater)

With new research and redesigns added to the basic 1/32 Ho 229, the brave form of this rare flying wing has been recreated as an even more advanced two-seater model. Be sure to add this Ho 229 B to your collection, as it will surely stand out among the many other aircraft in your collection.

It can be recreated as either a single-seater or a two-seater, and features a clear exterior that allows you to enjoy the internal structure.

This new release was developed from the 1/32 Ho 229 single-seater through extensive studies and redesigns. Add this truly unique piece to your aircraft collection.

This kit offers build options for either the single-seat or two-seat model and the clear exterior parts showcase the detailed internal structure.

The Spirit of the Horten Brothers Revived Through SWS!

From a young age, the Horten brothers were fascinated by gliders and flying wing aircraft. Under the guidance of Dr. Lippisch, designer of the Me 163, they pursued flying wing prototypes, culminating in the formal adoption of the Ho 229. Although several high-performance variants were planned, none saw combat before the war ended. Among these, the two-seat night fighter was considered the most practical. It featured a narrow tandem cockpit, with a radar operator seated in the rear, and a FuG 220 Lichtenstein radar antenna mounted on the nose, same as the He 219, for night interception.

The SWS kit faithfully recreates this advanced concept as the Ho 229 B Nachtjäger, based on detailed research from actual He 219 and Luftwaffe night fighter documentation. Even under the pressures of late-war Germany, the Ho 229 B exemplified bold and forward-thinking design. Now, through SWS, this “Bird of prey of the Luftwaffe” can take flight once more in your aircraft collection.

Jumo 004 engine

The world's first practical axial-flow turbojet engine, used in combat. In SWS kit, its internal structure is reproduced in such detail that you can see clearly how the air flows from the intake port into the engine and is transformed into thrust.

 Landing gear (nose gear, main gear)

Since flying wing aircraft cannot be equipped with high-lift devices, they inevitably have a higher landing speed and have to rely to some extent on the nosewheel to maintain a level landing. As a result, like the Ho 229, the Ho 229 B is equipped with a huge nosewheel the same size as the Do 335's main wheels, and the landing struts are also thick and sturdy.

Cockpit

As a two-seater night fighter, the cockpit was narrow from side to side, with two tandem seats arranged side by side, and the radar operator sat in the rear seat.

FuG 220 Liechtenstein radar antenna

It is equipped with the same engine as the He 219.

Mk 108 30mm cannon

Two additional guns are mounted on each side at the base of the left and right wings, giving a total of six heavily armament guns, including two Mk 103 guns!

Features

• Based on the extensively researched 1/32 single-seat kit, this model brings the previously paper-only two-seat model to life for the first time in three dimensions. Areas lacking real-world references have been faithfully interpreted through Zoukei-Mura’s original analysis and design.
• Bilingual instruction manual (Japanese and English) with detailed diagrams, allowing modelers to gain technical insight into the aircraft throughout the assembly process.
• Two sets of fictional decal markings, created under the premise: what if Ho229 B had entered operational service?
• Canopy can be built open or closed. Masking sticker for accurate paint separation is included.
• Options for single-seat or two-seat configurations. Clear exterior parts showcase internal structures.

The Ho 229 B: Outstanding Features at a Glance!

1 Jumo 004 engine

The Jumo 004 engine: the first axial-flow turbojet used in combat. Axial flow fans, also known as propeller fans, are characterized by their high airflow and low pressure, making them ideal for cooling and heat dissipation. The SWS kit meticulously reproduces the internal structure, demonstrating how air is drawn in through the intake port and transformed into propulsive force within the engine.

2 Wing Internal Fuel Tank

Two tanks (four in total) are installed on each side, one in the front edge of the wing and one inside the wing. This configuration enables long-distance flight!

3 MK 103 30mm cannon

Same as Ho 229, it is equipped with two cannons (one on each side) at the base of the main wings!

4 MK 108 30mm cannon

Two additional guns (four total) have been added to the base of ③ and ④! If attacked by two types of cannons (six total), even a bomber would be no match.

5 Cockpit

The two-seater night fighter features a narrow front-rear tandem cockpit. The rear cockpit has a radar scope.

6 Canopy

The canopy has been changed to a long, two-seat type.

7 Windshield

This SWS kit reproduced a windshield that is integrated with the nose section, just like the real aircraft!

8 FuG 220 Lichtenstein radar

FuG202 was also used on the He 219.

9 Taxiing Light

Since this is a night fighter, an additional light has been added for use when moving on the ground.

10 Air Intake and Nose Shape

To accommodate a tandem cockpit, the forward fuselage and nose were extended.

11 Main Wing

This flying wing design lacks vertical stabilizers, reducing radar reflection. Carbon-based paint enhances stealth. The wings were made of wood and incorporates a 1.05° washout to reduce drag and improve fuel efficiency.

12 13 Landing Gear (12. Nose landing gear. 13 Main landing gear)

Flying wing aircraft, which cannot be equipped with high-lift devices to enhance lift, inherently require higher landing speeds. Due to the difficulty of landing at a high angle of attack (the angle between the line of sight and the horizontal plane), they must maintain a level attitude during touchdown. Consequently, landings rely more heavily on the nose landing gear. Like the Ho 229, the Ho 229 B has a large nose wheel—same size to the Do 335’s main gear—and reinforced struts to withstand the impact of takeoff and landing with high-thrust jet engines.
Notably, while real aircraft tires typically bear the manufacturer's logo, this model features a deliberately altered design with the fictional “OONTINENTAL” branding by Zoukei-Mura.

Control Surfaces and Deceleration Devices

14 Drag Rudder、15 Drag Chute、16 Air Brake

In flying wing aircraft lacking conventional tail structures, control surfaces serve multiple roles, primarily for attitude control. The outer surfaces function as elevons—acting as elevators when moved symmetrically and as ailerons when moved asymmetrically. The center and inner surfaces, originally intended to operate similarly, appear to have been restricted to downward movement to facilitate nose-down control.

Deceleration systems include air brakes and a drag chute mounted on the underside of the rear fuselage. Drag rudders, installed on both upper and lower wing surfaces, serve the yaw control function of traditional rudders. When deployed, they generate asymmetric drag, slowing the corresponding wing and enabling directional control. These features exemplify the ingenuity embedded in the aircraft’s boomerang-like design.

Aircraft Comparison: Ho 229 vs. Ho 229 B

Airframe

The original SWS kit “Ho 229” is based on the unfinished prototype “Ho IX V3”, reconstructed as a hypothetical operational single-seat fighter-bomber, assuming it had entered combat. In contrast, the new “Ho 229 B” represents a two-seat night fighter model—one of the more practical designs among the proposed models.

Engine Cowling

Both models use the same Jumo 004 axial-flow turbojet engines, but their cowlings differ due to changes in nose design. The Ho 229 features a smoothly contoured cowling that blends into the upper fuselage and extends toward the front intake. In contrast, the Ho 229 B has a shorter, more sharply defined cowling, tapering forward and ending near the center of the upper fuselage.

Cockpit

The Ho 229 featured a prototype-style cockpit framed with pipes and metal panels, exposing the pilot to intense noise and vibration from the adjacent Jumo 004 engines. The nose gear was directly connected to the fuselage frame, leaving the pilot’s footwell open to the ground and subject to significant landing impact.

In contrast, the Ho 229 B adopted a tandem-seat layout, similar to modern combat aircraft, to accommodate night-fighting equipment, radar systems, and improved crew protection. The cockpit evolved into a bathtub-style enclosure with internal walls, reportedly planned to include armor plating on the bottom and sides. The nose gear was mounted to the reinforced cockpit floor, enhancing both structural integrity and pilot safety.

Airframe Shape

Both aircraft share the distinctive boomerang-like silhouette characteristic of flying wings. However, when compared side by side, the Ho 229 appears more compact due to its shorter nose, closely resembling a true boomerang. In contrast, the Ho 229 B features an elongated, sharply contoured nose to accommodate the tandem cockpit, resulting in a more pointed profile. This modification also extends the engine intakes forward. Combined with the nose-mounted antenna, the Ho 229 B presents a more unconventional and striking appearance.

Nose Antenna

A defining feature of the two-seat Ho 229 B is the nose-mounted radar antenna, which is not on the single-seat Ho 229. The Ho 229 B is equipped with the FuG 220 Lichtenstein radar antenna, used on the He 219, for night-time target acquisition. The SWS kit faithfully reproduces this delicate and distinctive component with precise angles and durability.

Armament

The daytime fighter Ho 229 was equipped with two Rheinmetall 30mm MK 103 cannons. The night fighter Ho 229 B added four more Rheinmetall 30mm MK 108 cannons, totaling six. Capable of downing U.S. bombers like the B-17 or B-24 with just four hits, this configuration represented formidable firepower for its time. The SWS faithfully recreates this hypothetical, heavily armed night fighter.

Markings

The Ho 229 B features two camouflage schemes typical of night fighters with two distinctive tail markings. These designs are based on the premise that, if the aircraft had been deployed operationally. Please enjoy your preferred color schemed and marking combinations.

• series : ZOUKEI-MURA (Scale model) SWS (SUPER WING SERIES) SWS body
• specification : Injection-molded plastic kit
• Material : 2-color molding (gray, clear) PS
• Sculpted by : ZOUKEI-MURA
• Scale : 1/32 scale
• size : Height approx. 112mm, total width approx. 525mm, total length approx. 283mm
• Total number of Parts : 369
• Product content : 2 decals, 1 masking sticker
• Remarks : Can be recreated as a single-seater or two-seater