Sold out

Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 RC Crawler (White)

Product Code: AXI00002V2T1
Barcode: 605482153925
$279.99
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

At 1/24 scale, the ready-to-run Axial SCX24‚ Jeep Wrangler JLU CRC 4WD enables any RC enthusiast to stage a crawling adventure anytime and anywhere, indoors or out. Its detailed body and strong performance combine for massive fun in micro size.

No matter where you are, the 1/24 scale Axial SCX24‚ Jeep Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you're stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside‚ where its water-resistant electronics are safe from the elements ‚and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks.


Features

  • Includes radio transmitter and receiver and battery
  • Comes with ESC, motor, and servo already installed
  • Features a realistic new body design
  • Licensed wheels are modeled after 1:1 KMC Machete Wheels
  • Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires
  • 3-Link front and 4-link rear suspension provides optimal handling
  • Two LED lights are included in the front bumper for night driving
  • Worm drive gear on front and rear axles creates additional ground clearance, improving on high-pinion axles
  • Realistic steel frame rails add strength
  • True, full-time 4-wheel-drive
  • Removing one clip allows the body to be tilted for battery access


Includes

  • (1) Axial SCX24‚ Jeep Wrangler JL RTR with:
  • (1) AX-4 2.4GHz 2-Channel Radio
  • (1) AE-6 Forward/Reverse ESC/Rx
  • (1) SCX24 88T Motor with Pinion
  • (1) AS-1 Micro Servo
  • (1) Dynamite 7.4v 350mAh 2S LiPo Battery
  • (1) USB Charger
  • (4) AA Batteries
  • (1) Product manual

Requires

Nothing more required! completely equipped in the box.



The Axial SCX24‚ Jeep Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24‚ Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.


WORM GEARS

An improvement over high-pinion axles, the front and rear axles use a worm drive gear for increased ground clearance.


STEEL FRAME RAILS

Realistic steel frame rails give the chassis added strength.


FRONT AND REAR SOLID AXLES

The front and rear axles consist of a two-piece, molded plastic, solid axle design. For optimal handling, the SCX24‚ suspension features a three-link front and four-link rear setup.


DURABLE STEEL AXLES

Steel front and rear axles, front stub axles, and dogbones provide the strength and durability needed to keep going during tough climbs and over rough trails.


SPLINED DRIVE SHAFTS

The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.


COILOVER SHOCKS

Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the unstoppable crawling performance you expect from Axial.

  • Completion Level : Ready-to-Run (everything included)
  • Scale : 1/24
  • Length : 7.8 in (199.5mm)
  • Width : 3.9 in (99.5mm)
  • Height : 4.2 in (106.5mm)
  • Ground Clearance : 1.06 in (27mm)
  • Wheelbase : 5.2 in (132.5mm)
  • Track : 3.9 in (99.5mm)
  • Front Track : 3.9 in (99.5mm)
  • Rear Track : 3.9 in (99.5mm)
  • Chassis : Stamped Steel Rails
  • Suspension : Solid Axle, Front and Rear
  • Shock Type : Coilover .9-1.3 in (24-33.4mm), Plastic
  • Drivetrain : 4WD
  • Differential : Worm Gear 16T/4T
  • Wheel Type : Black Plastic
  • Wheel Diameter : 1.0 in (26mm)
  • Wheel Width : .48 in (12.4mm)
  • Tire Tread : Nitto Trail Grappler M/T
  • Tire Diameter : 2.0 in (51mm)
  • Motor Type : Brushed
  • Motor Size : 180
  • Engine Size : 88T
  • Pinion : 10T
  • Spur Gear : 55T
  • Speed Control Included : Yes
  • Radio : Axial® 2.4GHz, 2 Channel
  • Servos Included : Yes
  • Batteries : 7.4V 350mAh 30C LiPo
  • Charger : USB LiPo
  • Body : Axial Jeep JL Hardtop
  • Ball Bearings : Full
  • Experience Level : Beginner
  • Recommended Environment : All-Terrain
  • Is Assembly Required : No